top of page

NANO4LIFE NANOTECHNOLOGY PRODUCTS FOR COATING SOLUTION PROVIDE UNIQUE PROPERTIES  AS, EASY TO CLEAN ,WATERPROOFING, INVISIBLE-ANTI STICK-UV PROTECTION

NANO4-ULTRACOAT®

Throught it’s unique formula creates an invisible layer of 500nm 
thicknes offering on all porous surfaces TEXTILE-WOOD-STONE-SHOES  
Special Sealing and antibacterial protection

​

​

    Nano4-Ultracoat® is a new water based Ultra-hydrophobic coating Nanotechnology product . After applying the product and upon completion of the curing process (24 hours), a thin layer 500 nm of SiO2 (Silicon Dioxide) seals the protected area so.  

​

     PRODUCT’S UNIQUE ATTRIBUTES:

​

    Protects from oil/water penetration (iso 4920 2/ rating 90-100, iso 14419 rating 5) on fabrics, woods  and stones and so generates an inho- spitable environment depriving microorganisms of moisture and food. Because of absence of water AATCC 100 standards can be achieved in a physical way without using of biocides. By its ultrahydrophobic effect, water is will be concentrated on the surface at an optimum, leaving a maximum of dry places, where a high natural death rate of wet germs (pseudomonas aeruginosa, proteus sp., klebsiella sp., acinetobacter sp. and stenotrophomonas maltophilia) is achieved. 
Waterproofing and easy removal of  stains and all types of dirt deposit on the absorbent  surfaces. Humidity, coffee, ketchup, wine, oil, syrup, sauces, and other hot or cold liquids are easily removed  when it’s protected with the Nano4-Ultracoat®.

​

       ESPECIALLY / PARTICULARLY SUITABLE FOR OUTDOORS:

​

    Protects stone and concrete facades, monuments or infrastructure against heavy corrosion by

repelling bacteria and water. Furthermore, it creates an extremely high level of protection against

soiling and moss growth. Protected surfaces can be washed without the use of cleaning agents.

​

      CONTACT ANGLE

       Drop ultrahydrophobic contact angle of the surface is 160° 

 

     Whether you want to stay dry in the rain or be protected against spots by accidents of thedaily life - there is always rely on  Nano4-Ultracoat® .

 

        Nano4-Ultracoat®  does not change the look, feel or breathability of the coating surface.


       Nano4-Ultracoat®  coating every porous surface  with an invisible non-adhesive coating. This protection has the effect that dry dirt won’t stick to the material any more. Damp dirt will not be absorbed any more from the porous surface.
 
        Humidity, water, coffee, ketchup, wine, coffee, oil, syrup, sauces, and other hot or cold liquids are easily removed from the porous surfaces when it’s protected with Nano4-Ultracoat® , by simply dabbing with an absorbed cloth, the wet spots will disappear again from your porous surfaces   goes back to its original state as if nothing had happened.

 

 

       Nano4-Ultracoat®  has no effect on the skin

NANO4LIFE ANTIBACTERIAL
Nano4-Ultracoat® works great on:

All flat absorbent surfaces , especially textiles,wood, stones,shoes   

TEXTILES

  • ​Furniture

  • Carpets,  and rugs 

  • Canvas boat sails 

  • Car Seat

  • Swimming pools covers

  • Theatre seats

  • Shoes

STONES 

  •    Stone walls.

  •    Insulation, sealing cement pools.

  •    Walls painted with plastic.

  •    Tiles.

  •    Blocks.

  •    Stone flooring.

  •    Sidewalks.

WOOD

  • Wooden structures

  • Pergolas.

  • Wooden garden furniture.

  • Deck wooden .

  • Wooden roofs and trusses.

  • Wooden fences.

  • Wooden floors.

Advantages on using Nano4-Ultracoat®

  •  Waterproofing and easy removal of stains and all types of dirt deposit on the porous surfaces. Humidity, coffee, ketchup, wine, oil, syrup, sauces, and other hot or cold liquids are easily removed from the porous surfaces when it’s protected with Nano4-Ultracoat®

  • It contains no silicones, waxes or oils.

  • 100% ecological 

  • The coating is extremely strong.

  • 100% invisible sealing protection.

  • Surfaces will be easier to clean after application

  • Nano4-Ultracoat® does not change the look, feel or breathability of the fabric.

  • Nano4-Ultracoat® has no effect on the skin.

  • Antibacterial protection

  • Saves the environment and money by reducing  use of chemical detergents by up to 90%

Customer Targets

  •    Homeowners 

  •    Furniture retailers

  •    Manufacturers of carpets and rugs

  •    Hotels and Restaurants  

  •    Cruise Ships and boats

  •    Military 

  •    Sports clubs and Hunters

  •    Hospitals

  •    Professionals tailors

How to use the product

  1.   Clean the porous surfaces first, before using Nano4-Ultracoat®, otherwise it will trap dirt and existing stains will be blocked in.

  2.  Spray the porous surfaces with Nano4-Ultracoat® 15cm away from the surface and evenly apply Nano4-Ultracoat®  to the surface where  you want protection. After applying Nano4-Ultracoat® it takes 24 hours (at 20C) to be fully cured. The time required for curing may  vary depending on ambient temperatures.  If you want to reduce the curing time you can Heat: 170°C 1-2min, 100°C - 4 min, 60°C -10 min.

  3.   Another way to protect the porous surfaces  is by dipping or submerging  into Nano4-Ultracoat®

  4.   For more and analytic installation instructions please click here (INSTALLATION INSTRUCTIONS) to read our interactive book   or  to  Download  the PDF file.

 

Duration of protection

        15-20 washings (tumbler dry required)/ 3500 hours artificial weathering according to 11507 A (5-6 years outside according to European weather conditions. Provided that the placement of Nano4-Ultracoat® made in accordance with the instructions.

Consumption

          The amount of product needed each time depends on the method of application and the porous of the surface. In any  case  the concumption will be between 30ml/m2 and 200ml/m2. This means that 1 liter can cover the surface of 5m2 to 33m2. We recommend to test each type of surface first to determine the absorption of the surface. An easy test to calculate the absorption of the surface is to wet 1m2 of the surface by using normal water. By this way you can see what is the exactly consumption for each surface.

Quality ISO 9001:2008

       Great importance and care in accordance to the standards ISO 9001:2008 are taken during the production of our products. So we ensure to our customers that all our products meet all specifications and are in excellent condition when purchased. All our products are sealed in production and customers, before the purchase, can easily check the date of manufacture and expiry date of the products. See details in the photo.

Order Products

Thermoplastic bottle sealing

LOT:

01 =date

12 =month

15 =year

06=line production

Exp. Date:

12 =month

17 =year

 

           All ΝΑΝΟ4LIFE® products are in stock and can be delivered within 24 hours to any destination in the world.  Delivery in European Countries can be provided within 1 day and other points in the world in approximately 3 days with very low transportation costs.

 

        Available packs is : 100ml, 200ml, 500ml, 1Liter, 4Liters, 20Liters, 200Liters, 1000Liters.

 

  •    If you want to see a video with the product functions please click the video icon bellow

  •    If you want to read and download the product broshure in an interactive PDF file please click here

  •    If you want to order the product via our e-shop please click to the e-shop button.

 

NANOTECHNOLOGY PRODUTS, COATING SOLUTIONS
bottom of page